POWER MIRROR CONTROL SYSTEM Reverse Shift-linked Function of Power Mirrors does not Operate

SYSTEM DESCRIPTION

When the reverse signal is sent from the hybrid vehicle control ECU through the CAN communication line to the front door ECU LH and RH, the front door ECU LH and RH activate the outer rear view mirror LH and RH reverse shift-linked function.

PROCEDURE

1. CHECK DTC

   
   

   1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      Result

      Result	Proceed to
      CAN DTC is not output	A
      CAN DTC is output (for LHD)	B
      CAN DTC is output (for RHD)	C

   
   

   B

   GO TO CAN COMMUNICATION SYSTEM Click here

   C

   GO TO CAN COMMUNICATION SYSTEM Click here

   A

2. CHECK OUTER MIRROR SWITCH FUNCTION (POWER MIRROR CONTROL FUNCTION)

   
   

   1. Check that the outer rear view mirror LH and RH can be moved using the outer mirror switch.

      OK
      Outer rear view mirror LH and RH can be moved using the outer mirror switch.

   
   

   NG

   GO TO PROBLEM SYMPTOMS TABLE Click here

   OK

3. CHECK OPERATION OF SHIFT INDICATOR

   
   

   1. Check that the shift indicator of the combination meter operates normally.

      OK
      Shift indicator of combination meter operates normally.

   
   

   NG

   GO TO METER / GAUGE SYSTEM Click here

   OK

4. CHECK FRONT DOOR ECU (OPERATION)

   
   

   1. Replace the front door ECU with a new one or normally operating one, and check if the malfunction disappears.

      Result

      Result	Proceed to
      Outer rear view mirror LH does not operate normally	A
      Outer rear view mirror RH does not operate normally	B
      Outer rear view mirror LH operates normally	C
      Outer rear view mirror RH operates normally	D

   
   

   A

   REPLACE OUTER MIRROR ACTUATOR ASSEMBLY LH Click here

   B

   REPLACE OUTER MIRROR ACTUATOR ASSEMBLY RH Click here

   C

   REPLACE FRONT DOOR ECU LH Click here

   D

   REPLACE FRONT DOOR ECU RH Click here