WINDOW DEFOGGER WIRE REPAIR

PROCEDURE


  1. REPAIR DEFOGGER WIRE

    A000YZEE02
    *1 Repair Point
    *2 Broken Wire
    *3 Masking Tape

    1. Clean the broken wire tips with grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. Thoroughly mix the repair agent.

    4. A000WTWE07
      *1 Fine Tip Brush
      *2 Repair Point

      Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not repair the defogger wire again for at least 24 hours.