CAUTION / NOTICE / HINT
Tech Tips
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
PROCEDURE
INSTALL REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
Apply MP grease to the sliding and rotating areas of the rear power window regulator motor assembly.
Using a T25 ''TORX'' driver, install the rear power window regulator motor assembly with the 3 screws.
INSTALL REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY LH
INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
INSTALL REAR DOOR QUARTER WINDOW GLASS LH
INSTALL REAR DOOR GLASS RUN LH
INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
INSTALL REAR DOOR DIVISION BAR LOWER BRACKET LH
INSTALL REAR DOOR SERVICE HOLE COVER LH
INSTALL REAR DOOR GLASS INNER WEATHERSTRIP LH
INSTALL REAR SIDE TRIM BOARD COVER LH (w/ Rear Door Sunshade)
INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade)
INSTALL REAR CURTAIN SUB-ASSEMBLY LH (w/ Rear Door Sunshade)
INSTALL REAR DOOR NO. 2 FRAME GARNISH LH
INSTALL REAR DOOR FRAME GARNISH LH
INSTALL REAR DOOR TRIM COVER LH
INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
w/o Rear Door Sunshade
w/ Rear Door Sunshade:
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)