REAR MILLIMETER WAVE RADAR SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR MILLIMETER WAVE RADAR SENSOR ASSEMBLY

   

   
   

   1. Connect the connector.

   2. Install the rear millimeter wave radar sensor assembly with the 3 nuts. Tighten in the order shown in illustration.

      Torque:

      5.5 N*m  { 55 kgf*cm, 49 in.*lbf }

2. INSTALL REAR BUMPER ENERGY ABSORBER

   Click here

3. INSTALL REAR BUMPER COVER

   Click here

4. INSTALL UPPER REAR BUMPER COVER LH

   Click here

5. INSTALL UPPER REAR BUMPER COVER RH

   Click here

6. ADJUST REAR MILLIMETER WAVE RADAR SENSOR ASSEMBLY

   
   

   1. Adjust the rear millimeter wave radar sensor Click here.