PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2074, B2075

DTC Code DTC Name
B2074 Driver Side Seat Belt Buckle Switch Circuit Malfunction
B2075 Passenger Side Seat Belt Buckle Switch Circuit Malfunction

DESCRIPTION

The seat belt control ECU receives driver side buckle switch condition information from the center airbag sensor through the CAN communication line and controls the pre-crash safety system.

This code is output when a buckle switch malfunction signal is received from the airbag system.

When DTC B2074 is detected, DTC B1655 is also output.

DTC Code DTC Detection Condition Trouble Area
B2074 While initial check is running, power switch is ON (IG) and pre-crash safety system is operating, malfunction signal is received from center airbag sensor for 3 seconds

  • Front seat outer belt (for driver side)

  • Center airbag sensor

  • CAN communication system

  • Seat belt control ECU
B2075 While initial check is running, power switch is ON (IG) and pre-crash safety system is operating, malfunction signal is received from center airbag sensor for 3 seconds

  • Front seat outer belt (for front passenger side)

  • Center airbag sensor

  • CAN communication system

  • Seat belt control ECU

CAUTION / NOTICE / HINT

Note


  • If DTC B1655 is not cleared first, DTC B2074 continues to be output.

  • If DTC B1656 is not cleared first, DTC B2075 continues to be output.

PROCEDURE


  1. CHECK FOR DTC (AIRBAG SYSTEM)


    1. Using the intelligent tester, enter the following menus: Body / SRS Airbag. Then select "DTC".

    2. Recheck for DTC.

      Result
      Result Proceed to
      DTC B1655 or B1656 is not output A
      DTC B1655 or B1656 is output B

    A

    REPLACE SEAT BELT CONTROL ECU Click here

    B

    GO TO AIRBAG SYSTEM Click here