SRS SEAT CUSHION AIRBAG ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL REAR SEAT AIR BAG ASSEMBLY RH

   
   

   1. 

      Install the cushion airbag.

   2. Install the wire harness clamp and connect the connector.

   3. Install the 3 bolts.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

2. INSTALL REAR SEAT CUSHION ASSEMBLY RH

   Click here

3. INSTALL CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

8. CHECK SRS WARNING LIGHT

   
   

   1. Check the SRS warning light Click here.