FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

    A000X2AE02
    Text in Illustration
    *1 Hook (A)
    *2 Hook (B)

    1. Attach the 5 hooks (A).

    2. Push the front passenger airbag assembly to attach the 5 hooks (B).

    3. Install the 2 screws.

  2. INSTALL NO. 2 INSTRUMENT PANEL WIRE

    A000UT5

    1. Connect the 2 airbag connectors.

      Note


      • When connecting airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

    2. Push in the lock to connect the airbag connector.

    3. Attach the clamp to install the No. 2 instrument panel wire to the front passenger airbag assembly.

  3. INSTALL NO. 3 HEATER TO REGISTER DUCT

    Click here

  4. INSTALL DEFROSTER NOZZLE ASSEMBLY

    Click here

  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  6. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. CHECK SRS WARNING LIGHT

    Click here

  9. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  10. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  11. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here