CLEARANCE WARNING BUZZER(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 CLEARANCE WARNING BUZZER

   
   

   1. Attach the clamp to install the No. 2 clearance warning buzzer.

   2. Connect the connector.

2. INSTALL REAR SEAT OUTER BELT ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

8. CHECK SRS WARNING LIGHT

   Click here