PARKING ASSIST MONITOR SYSTEM, Diagnostic DTC:C1691

DTC Code DTC Name
C1691 Back Camera Initialization Incomplete

DESCRIPTION

This DTC is stored when the multi-media module receiver assembly judges that the back camera initial setting has not been memorized (television camera optical axis adjustment is incomplete).

DTC Code DTC Detection Condition Trouble Area
C1691 Back camera initial setting has not been memorized

  • Television camera optical axis adjustment

  • Multi-media module receiver assembly

CAUTION / NOTICE / HINT

Note


  • When "System initializing" is displayed on the accessory meter assembly after disconnecting the cable from the negative (-) auxiliary battery terminal, correct the steering angle neutral point Click here.

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

PROCEDURE


  1. ADJUST SETTINGS (CAMERA POSITION SETTING)


    1. Perform the following procedure depending on the memory conditions to register the vehicle information into the multi-media module receiver assembly.


      1. Refer to television camera assembly optical axis adjustment Click here.


    NEXT

  2. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      No DTC is output A
      DTC C1691 is output B

      Tech Tips


      • If DTC C1691 is output, perform the television camera assembly optical axis adjustment again.

      • If DTC C1691 is still output after performing the television camera assembly optical axis adjustment 3 times, replace the multi-media module receiver assembly.


    A

    END (ADJUST SETTINGS ARE DEFECTIVE)

    B

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here