TELEPHONE ANTENNA INSTALLATION

PROCEDURE


  1. INSTALL TELEPHONE ANTENNA ASSEMBLY


    1. When reusing the telephone and GPS antenna:

      Install a new seal.

    2. A000VC0E06

      Attach the 3 claws and 3 guides to install the telephone and GPS antenna as indicated by the arrows in the order shown in the illustration.

  2. INSTALL TELEPHONE AND GPS ANTENNA


    1. A000Z3K

      Install the telephone and GPS antenna cover as shown in the illustration.

    2. A000Z1B

      Install a new washer and holder as shown in the illustration.

    3. Install the bolt.

      Torque:
      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

    4. Connect the connector.

  3. INSTALL ROOF HEADLINING ASSEMBLY


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  6. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  7. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  8. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  9. CHECK SRS WARNING LIGHT

    Click here