REMOTE TOUCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 3 BOX PANEL

    Click here

  5. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE REMOTE OPERATION BOARD


    1. A000Z38

      Detach the 7 claws.

    2. A000XSN

      Move the remote operation board in the direction of the arrow in the illustration to remove it from the upper console panel sub-assembly.

  7. REMOVE SWITCH KNOB


    1. A000WX7

      Remove the switch knob upward.

  8. REMOVE COVER


    1. A000WG8

      Detach the 2 clips and remove the cover.

  9. REMOVE INTEGRATION PANEL SUB-ASSEMBLY


    1. A00105Z

      Remove the 2 screws.

    2. A000Y3E

      Move the remote integration panel sub-assembly in the direction of the arrow in the illustration.

  10. REMOVE REMOTE OPERATION SWITCH


    1. A000ZK9

      Remove the 4 screws and remote operation switch.