HARD DISK DRIVE INSTALLATION

PROCEDURE

1. PRECAUTION

   Note

   Precautions for multi-media module receiver assembly and hard disc Click here.

2. INSTALL HARD DISC

   
   

   1. 

      Push the hard disc in the direction of the arrow shown in the illustration to install it.

   2. Attach the 2 claws to install the cover.

   3. Install the 2 screws.

3. INSTALL NO. 2 RADIO BRACKET

   Click here

4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

6. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

7. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here