STEREO JACK ADAPTER ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 3 BOX PANEL

    Click here

  5. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A000Z8K

      Disconnect the 2 connectors.

    2. Detach the 2 claws and remove the No. 1 stereo jack adapter assembly.

  7. REMOVE REAR CENTER SEAT CUSHION ASSEMBLY (for Power Seat, for 5-Passenger with Ottoman)

    Click here

  8. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for Power Seat, for 5-Passenger with Ottoman)

    Click here

  9. REMOVE HEADPHONE TERMINAL (for Power Seat, for 5-Passenger with Ottoman)


    1. Disconnect each connector.

    2. A000UPF

      Using a moulding remover B, detach the 8 claws and remove the bezel.

    3. A000UD9

      Detach the 6 claws and remove the 2 headphone terminals.

  10. REMOVE REAR SEAT LOWER CONSOLE BOX COVER (for 4-Passenger with Ottoman)

    Click here

  11. REMOVE REAR SEAT CONSOLE BOX ASSEMBLY (for 4-Passenger with Ottoman)

    Click here

  12. REMOVE REAR SEAT CONSOLE BOX PANEL (for 4-Passenger with Ottoman)

    Click here

  13. REMOVE HEADPHONE TERMINAL (for 4-Passenger with Ottoman)


    1. A00104N

      Disconnect the 2 connectors.

    2. Detach the 2 clamps.

    3. Detach the 6 claws and remove the 2 headphone terminals.