INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Temporarily install the front No. 2 speaker assembly by aligning the positioning pins of the front No. 2 speaker assembly with the instrument panel.

    3. Install the front No. 2 speaker assembly with the 2 bolts.

      Note


      • Do not touch the cone of the speaker.

      • When installing the speaker to the instrument panel be careful so that the wires do not get caught between the parts.

  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. Attach the 2 clips and 7 claws to install the No. 1 instrument panel speaker panel sub-assembly.

  3. INSTALL FRONT PILLAR GARNISH LH

    Click here

  4. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Temporarily install the front No. 3 speaker assembly by aligning the positioning pins of the front No. 3 speaker assembly with the instrument panel.

    3. Install the front No. 3 speaker assembly with the 2 bolts.

      Note


      • Do not touch the cone of the speaker.

      • When installing the speaker to the instrument panel be careful so that the wires do not get caught between the parts.

  5. INSTALL NO. 1 SPEAKER HOLE COVER


    1. Attach the 4 clips, claw and clamp to install the hole cover.