CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 3 bolts.
INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 3 bolts.
INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY
Connect the connectors.
Insert the multi-media module receiver assembly with bracket.
Note
When inserting the radio receiver, do not press the knobs on it.
Attach the 6 clips.
Install the multi-media module receiver assembly with bracket with the 2 bolts.
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
INSTALL NO. 3 BOX PANEL
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)