RADIO RECEIVER REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   CAUTION:

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

5. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

   Click here

8. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

   Click here

9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

10. REMOVE NO. 3 BOX PANEL

    Click here

11. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

12. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

14. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

15. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

16. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    
    

    1. 

       Remove the 2 bolts.

    2. Detach the 6 clips and pull out the multi-media module receiver assembly with bracket.

    3. Disconnect the connectors and remove the multimedia module receiver assembly with bracket.

17. REMOVE NO. 2 RADIO BRACKET

    
    

    1. 

       Remove the 3 bolts and No. 2 radio bracket.

18. REMOVE NO. 1 RADIO BRACKET

    
    

    1. 

       Remove the 3 bolts and No. 1 radio bracket.