AUDIO AND VISUAL SYSTEM Rear Seat Control Switch Power Source Circuit

DESCRIPTION

This circuit provides power to the rear power seat switch (audio switch).

WIRING DIAGRAM

A000VJKE09

CAUTION / NOTICE / HINT

Note

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (REAR POWER SEAT SWITCH [AUDIO SWITCH] -AUXILIARY BATTERY AND BODY GROUND)


    1. A000Z34E01
      Text in Illustration
      *A for 4-passenger with Ottoman
      *B except 4-passenger with Ottoman
      *a

      Front view of wire harness connector

      (to Rear Power Seat Switch [Audio Switch])

      Disconnect the rear power seat switch (audio switch) connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for 4-passenger with Ottoman
      Tester Connection Condition Specified Condition
      S15-1 (E) - Body ground Always Below 1 Ω
      except 4-passenger with Ottoman
      Tester Connection Condition Specified Condition
      z54-9 (E) - Body ground Always Below 1 Ω

    3. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      for 4-passenger with Ottoman
      Tester Connection Switch Condition Specified Condition
      S15-8 (B) - Body ground Power switch off 11 to 14 V
      except 4-passenger with Ottoman
      Tester Connection Switch Condition Specified Condition
      z54-14 (B) - Body ground Power switch off 11 to 14 V

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR