PILLAR SPEAKER(for Quarter) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR HEADER SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. A000UNPE01

      Install the rear header speaker assembly and attach the clip.

    3. Install the 2 bolts.

  2. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

  3. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  4. INSTALL REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman Seat:

      Click here

    3. for fixed Seat:

      Click here

  5. INSTALL REAR DOOR SCUFF PLATE LH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  9. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  11. CHECK SRS WARNING LIGHT

    Click here