MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RHD and LHD.

  • The procedures listed below are for the LHD.

PROCEDURE


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. Install the ECU with the 2 screws.

    2. Connect the connector to the ECU.

      Note

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

    Click here

  3. INSTALL STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

    Click here