DESCRIPTION
If the steering control ECU detects a malfunction in the lock mechanism, it will turn the master warning light on, store the DTC C15A5/65, and stop VGRS operation.
| DTC Code | Detection Condition | Trouble Area |
|---|---|---|
| C15A5/65 | The steering control ECU detects that the LG terminal voltage is abnormal |
|
WIRING DIAGRAM
PROCEDURE
CHECK HARNESS AND CONNECTOR (STEERING CONTROL ECU - STEERING ACTUATOR)
| *1 | Rear view of wire harness connector: (to Steering Control ECU) |
| *2 | Front view of wire harness connector: (to Steering Actuator) |
| *3 | LV |
Disconnect the A41 steering control ECU connector.
Disconnect the z16 steering actuator connector.
Measure the resistance according to the value(s) in the table below.
| Standard resistance | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Measure the voltage according to the value(s) in the table below.
| Standard voltage | |||||||
|---|---|---|---|---|---|---|---|
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
| OK |
|
CHECK HARNESS AND CONNECTOR (STEERING CONTROL ECU - STEERING ACTUATOR)
Disconnect the A41 steering control ECU connector.
| *1 | Rear view of wire harness connector: (to Steering Control ECU) |
| *2 | LV |
Reconnect the z16 steering actuator connector.
Measure the resistance according to the value(s) in the table below.
| Standard resistance | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
| OK |
|
REPLACE STEERING CONTROL ECU Click here |
| NG |
|
REPLACE STEERING ACTUATOR Click here |