REAR SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY

    A000UGTE02
    *1 99.9 mm (3.93 in.)

    1. Fully extend the rear shock absorber rod.

    2. Using a drill, make a hole in the cylinder somewhere between A and B shown in the illustration to discharge the gas inside.

      CAUTION:

      Be careful as the cylinder is a high-pressure gas type which is at a higher pressure than normal shock absorbers. Also be careful with high temperatures as the cylinder's pressure becomes even higher.

      Note

      The gas is colorless, odorless and harmless.