HEIGHT CONTROL COMPRESSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE FRONT WHEEL RH

  3. REMOVE HEIGHT CONTROL COMPRESSOR


    1. Remove the 3 screws.

    2. A000VFU

      Partially remove the fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the compressor can be removed.

    3. A000WDH

      Disconnect the 2 connectors and detach the 2 clamps.

    4. Disconnect the height control filter from the front bumper reinforcement.

    5. Disconnect the height control tube (Type 2) Click here.

    6. A000VX0

      Remove the 2 nuts, bolt and height control compressor with bracket.

    7. Detach the 3 clamps.

    8. Detach the connector's claw and remove the connector from the bracket.

    9. A000X2N

      Remove the 3 bolts, 3 bushes and bracket from the compressor.