HEIGHT CONTROL SENSOR(for Front LH) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. DISCONNECT SKID CONTROL SENSOR WIRE


    1. A000WY6

      Remove the bolt and detach the 2 clips.

  3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A000YEJ

      Disconnect the connector.

    2. A000U2N

      Remove the bolt and disconnect the height control sensor link from the front No. 2 suspension lower arm LH.

    3. A000WB7

      Remove the 2 bolts and height control sensor.

      Note

      Do not drop the height control sensor. If it is dropped, replace it with a new one.