CONTROL VALVE ASSEMBLY(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

PROCEDURE


  1. REMOVE REAR WHEEL RH

  2. REMOVE QUARTER PANEL WHEEL OPENING MOULDING RH


    1. Remove the 4 screws and moulding.

  3. REMOVE REAR WHEEL HOUSE LINER RH


    1. Remove the 2 clips and 3 screws.

    2. Remove the 11 nuts and rear wheel house liner.

  4. REMOVE NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY


    1. Disconnect the connector.

    2. A000ZYWE02

      Using SST, disconnect the 3 air tubes Click here.

      SST
      09730-00010

    3. Disconnect the air tube from the clamp.

    4. A000YZD

      Remove the 2 nuts and height control valve.