TIRE PRESSURE WARNING ANTENNA(for Front Side) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ANTENNA

   
   

   1. Install the tire pressure warning antenna with the nut.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the connector.

2. INSTALL FRONT FENDER LINER LH

   
   

   1. Install the front fender liner LH with the 15 screws and 6 clips.

3. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH

   Click here

4. INSTALL FRONT FENDER MAIN SEAL LH

   Click here

5. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here