STEERING KNUCKLE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH

   
   

   1. 

      Install the front axle hub to the steering knuckle with the 4 bolts.

      Torque:

      65 N*m  { 663 kgf*cm, 48 ft.*lbf }

2. INSTALL STEERING KNUCKLE SUB-ASSEMBLY LH

   
   

   1. 

      Install the steering knuckle to the front lower ball joint with the 3 bolts.

      Torque:

      113 N*m  { 1152 kgf*cm, 83 ft.*lbf }

3. CONNECT FRONT NO. 1 SUSPENSION UPPER ARM ASSEMBLY LH

   Click here

4. CONNECT FRONT NO. 2 SUSPENSION UPPER ARM ASSEMBLY LH

   Click here

5. CONNECT TIE ROD ASSEMBLY LH

   Click here

6. INSTALL FRONT SPEED SENSOR LH

   Click here

7. CONNECT SKID CONTROL SENSOR WIRE

   Click here

8. INSTALL FRONT DISC BRAKE DUST COVER LH

   Click here

9. INSTALL FRONT DISC

   Click here

10. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

11. INSTALL FRONT AXLE SHAFT NUT LH

    Click here

12. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

13. REMOVE FRONT DISC

    Click here

14. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Click here

15. INSPECT FRONT AXLE HUB RUNOUT

    Click here

16. INSTALL FRONT DISC

    Click here

17. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

18. STAKE FRONT AXLE SHAFT NUT LH

    Click here

19. INSTALL FRONT WHEEL

    Click here

20. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    
    

    1. Inspect and adjust the front wheel alignment Click here.

21. CHECK ABS SPEED SENSOR SIGNAL

    
    

    1. Check the speed sensor signal Click here.

22. ADJUST VEHICLE HEIGHT

    
    

    1. Adjust the vehicle height Click here.

23. ADJUST HEADLIGHT ASSEMBLY

    
    

    1. Adjust the headlight Click here.

24. ADJUST OBJECT RECOGNITION CAMERA

    
    

    1. Adjust object recognition camera Click here.