FRONT AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  3. REMOVE FRONT DISC

    Click here

  4. REMOVE FRONT AXLE HUB BOLT LH


    1. A000XFPE03
      *1 Turn
      *2 Hold

      Using SST, remove the front axle hub bolt.

      SST
      09650-17011

      Note

      Do not damage the threads of the hub bolts.

  5. INSTALL FRONT AXLE HUB BOLT LH

    Note


    • Do not damage the threads of the hub bolts.

    • Install nuts to prevent damage to the hub bolts.


    1. A000ZF5E03
      *1 Washer
      *2 Nut
      *3 Hold
      *4 Turn

      Install a washer and nut to a new hub bolt as shown in the illustration.

    2. Using a screwdriver or an equivalent to hold the hub, turn the nut to pull the hub bolt until the bottom surface of the hub bolt head touches the axle hub.

  6. INSTALL FRONT DISC

    Click here

  7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  8. INSTALL FRONT WHEEL

    Torque:
    140 N*m  { 1428 kgf*cm, 103 ft.*lbf }