REAR DRIVE SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. DRAIN DIFFERENTIAL OIL

    Click here

  2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR


    1. A000VIB

      Remove the 3 nuts and differential support protector.

  3. REMOVE NO. 1 DIFFERENTIAL SUPPORT PROTECTOR

    Tech Tips

    Use the same procedure described for the No. 2 differential support protector.

  4. REMOVE REAR SUSPENSION MEMBER BRACE LH


    1. A000YHL

      Remove the 2 bolts and rear suspension member brace.

  5. REMOVE REAR SUSPENSION MEMBER BRACE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR AXLE ASSEMBLY LH

    Click here

  7. REMOVE REAR AXLE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR DRIVE SHAFT ASSEMBLY LH


    1. A000YQ2E04

      Using SST, remove the rear drive shaft.

      SST
      09520-01010
      09520-24010   ( 09520-32040 )

      Note


      • Be careful not to damage the drive shaft boot, dust cover and oil seal.

      • Be careful not to drop the rear drive shaft assembly.

    2. A000TRS

      Using a screwdriver, remove the snap ring.

  9. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.