FRONT DRIVE SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY LH

    Click here

  2. REMOVE FRONT AXLE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH


    1. A000UY3E04

      Using SST, remove the front drive shaft assembly.

      SST
      09520-01010
      09520-24010   ( 09520-32040 )

      Note


      • Be careful not to damage the drive shaft boot, dust cover and oil seal.

      • Be careful not to drop the front drive shaft assembly.

  4. REMOVE FRONT DRIVE SHAFT HOLE SNAP RING LH


    1. A000TRS

      Using a screwdriver, remove the front drive shaft hole snap ring LH.

  5. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH


    1. A000YX9

      Remove the bolt and disconnect the wire harness bracket.

    2. A000WV5

      Using water pump pliers, remove the bearing bracket hole snap ring.

    3. Remove the bolt and front drive shaft assembly from the drive shaft bearing bracket.

      Note


      • Be careful not to damage the drive shaft boot, dust cover and oil seal.

      • Be careful not to drop the front drive shaft assembly.