FRONT PROPELLER SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  2. LOOSEN FRONT PROPELLER SHAFT ASSEMBLY


    1. A000WU6E01
      Text in Illustration
      *a Matchmark

      Put matchmarks on the transfer companion flange and front propeller shaft.

    2. Using a 6 mm socket hexagon wrench, loosen the 6 bolts.

      Note

      Be careful not to damage the front propeller shaft.

    3. A000ZY2E01
      Text in Illustration
      *a Matchmark

      Put matchmarks on the front differential companion flange and front propeller shaft.

    4. Using a 6 mm socket hexagon wrench, loosen the 6 bolts.

      Note

      Be careful not to damage the front propeller shaft.

  3. REMOVE REAR ENGINE MOUNTING MEMBER


    1. A000WWU

      Support the hybrid vehicle transmission assembly with a transmission jack.

      Note

      Keep the transmission jack level with the weight properly supported.

    2. A000ZZU

      Remove the 4 bolts.

    3. Remove the 5 nuts and rear No. 3 engine mounting insulator, and remove the rear engine mounting member from the hybrid vehicle transmission assembly.

  4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    1. Remove the 12 bolts, 4 universal joint washers and front propeller shaft assembly.

      Note

      Do not bend the front propeller shaft at an excessive angle.