SHIFT LEVER REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

2. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

3. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

4. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

5. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here

6. DISCONNECT CABLE FROM AUXILIARY NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

   
   

   1. 

      Using a small screwdriver, detach the 2 claws and remove the shift lock release button cover.

      Tech Tips

      Tape the screwdriver tip before use.

   2. Depress the shift lock release button and move the shift lever to the N position.

   3. 

      Remove the nut and disconnect the floor shift gear shifting rod sub-assembly from the connecting rod swivel.

8. REMOVE CONSOLE BOX ASSEMBLY

   for 5-passenger with Ottoman: Click here

   w/o Rear Seat Entertainment System: Click here

   w/ DVD player: Click here

9. REMOVE NO. 1 CONSOLE BOX DUCT

   
   

   1. 

      Disconnect the 2 wire harness clamps from the No. 1 console box duct.

   2. Remove the 2 clips and pull out the No. 1 console duct.

10. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

    
    

    1. 

       for LHD:

       Disconnect the 2 connectors and 7 wire harness clamps from the transmission floor shift assembly.

    2. 

       for RHD:

       Disconnect the 3 connectors and 6 wire harness clamps from the transmission floor shift assembly.

    3. Remove the 4 bolts and transmission floor shift assembly.