MOTOR WATER JACKET COVER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER RH

    Click here

  2. REMOVE ENGINE ROOM SIDE COVER LH

    Click here

  3. REMOVE FRONT CENTER FLOOR COVER (w/ Cover)

    Click here

  4. DRAIN COOLANT (for Inverter)

    Click here

  5. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY

    Click here

  6. REMOVE MOTOR WATER JACKET COVER ASSEMBLY


    1. A000U0O

      Remove the 12 bolts.

    2. A000ZCZ

      Insert the blade of an oil pan cutter between the transmission. Cut through the applied sealer and remove the motor water jacket cover assembly.

      Note

      Be careful not to damage the contact surfaces of the motor water jacket cover assembly.