TRANSMISSION WIRE REMOVAL

PROCEDURE


  1. REMOVE FRONT CENTER FLOOR COVER (w/ Cover)

    Click here

  2. DISCONNECT OXYGEN SENSOR CONNECTOR (for Bank 1 Sensor 2)


    1. A000ZKE

      Disconnect the sensor connector.

    2. A000W39

      Remove the bolt, and disconnect the sensor connector bracket.

  3. REMOVE OIL STRAINER ASSEMBLY

    Click here

  4. REMOVE TRANSMISSION WIRE


    1. A000V39

      Remove the bolt, lock plate and ATF temperature sensor.

    2. Disconnect the 3 oil pressure switch connectors.

      Note

      When disconnecting the oil pressure switch connectors, do not bend the terminals.

    3. Disconnect the 3 connectors from the solenoid valves.

    4. A000X74

      Disconnect the wire connector.

    5. A000ZYA

      Using a union nut wrench (10 mm), remove the bolt.

    6. Pull out the transmission wire.