DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The following procedures are for the LH side.

PROCEDURE


  1. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

    Click here

  2. REPLACE REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


    1. A000TL7E02

      Using SST, remove the oil seal.

      SST
      09308-00010
    2. A000V4AE03
      *1 -0.5 to 0.5 mm

      Using SST and a hammer, tap in a new oil seal.

      SST
      09223-15030
      09950-70010   ( 09951-07150 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Note


      • Tap the oil seal uniformly so that the oil seal is straight.

      • After the installation, check that the oil seal has been tapped securely onto the differential.

  3. INSTALL REAR DRIVE SHAFT ASSEMBLY LH

    Click here