SHIFT LEVER POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT PARK/NEUTRAL POSITION SWITCH


    1. A000Y15E01
      Switch Side (Connector Front View)
      *1 MJ
      *2 FD

      Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

      Standard resistance
      7 (+B) - 1 (P) 7 (+B) - 2 (N) 7 (+B) - 3 (D) 7 (+B) - 4 (MJ) 7 (+B) - 5 (R) 7 (+B) - 6 (RV) 7 (+B) - 8 (B) 7 (+B) - 9 (FD)
      P position Below 1 Ω 4.2 to 5.1 kΩ 10 kΩ or higher Below 1 Ω 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher
      R position 10 kΩ or higher 4.2 to 5.1 kΩ 10 kΩ or higher Below 1 Ω Below 1 Ω Below 1 Ω 10 kΩ or higher 10 kΩ or higher
      N position 10 kΩ or higher Below 1 Ω 10 kΩ or higher Below 1 Ω 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher
      D position 10 kΩ or higher 4.2 to 5.1 kΩ Below 1 Ω Below 1 Ω 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher Below 1 Ω
      B position 10 kΩ or higher 4.2 to 5.1 kΩ 10 kΩ or higher Below 1 Ω 10 kΩ or higher 10 kΩ or higher Below 1 Ω Below 1 Ω

      If the results are not as specified, replace the park/neutral position switch.