WATER PUMP WITH MOTOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER RH

    Click here

  2. REMOVE ENGINE ROOM SIDE COVER LH

    Click here

  3. REMOVE FRONT CENTER FLOOR COVER

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  5. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR

    Click here

  6. DRAIN COOLANT (for Inverter)

    Click here

  7. REMOVE WATER PUMP WITH MOTOR AND BRACKET ASSEMBLY


    1. A000WEH

      Disconnect the water pump connector.

      Note

      Wrap the connectors of the vehicle wire harness and the water pump with motor and bracket assembly to prevent coolant from contaminating the connectors.

    2. Remove the 2 clips and disconnect the 2 water pump hoses.

      Note

      Apply insulating tape to the pipe and in the disconnected hose or cover the pipe and hose with plastic bags to prevent entry of foreign matter.

    3. A000THC

      Remove the 2 bolts and water pump with motor and bracket assembly.