HYBRID VEHICLE CONTROL ECU INSTALLATION

PROCEDURE


  1. INSTALL ECU BRACKET


    1. A000YVW

      Install the 2 ECU brackets with the 4 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL HYBRID VEHICLE CONTROL ECU


    1. A000Y0F

      Install the hybrid vehicle control ECU with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 4 hybrid vehicle control ECU connectors.

  3. INSTALL ENGINE ROOM ECU COVER

    Click here

  4. INSTALL ENGINE ROOM SIDE COVER LH

    Click here

  5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  9. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  11. RESET MEMORY

    Click here