POWER WINDOW CONTROL SYSTEM OPERATION CHECK


  1. CHECK WINDOW LOCK SWITCH

    A000YWM

    1. Turn the power switch on (IG).

    2. Press the window lock switch of the multiplex network master switch assembly.

      Tech Tips

      The illumination (LED) built into the switch knob of each seat does not turn off.

    3. Check that the power window for each seat except the driver seat can no longer be operated.

    4. Check that the power window for each seat cannot be operated from the driver seat.

    5. Press the window lock switch of the multiplex network master switch assembly again.

    6. Check that the power window for each seat except the driver seat can be operated.

    7. Check that the power window for each seat can be operated from the driver seat.

  2. CHECK MANUAL UP / DOWN FUNCTION


    1. Check that the driver side power window operates as follows:

      OK
      Condition Master Switch Switch Operation Power Window
      Power switch ON (IG) Driver side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)

    2. Check that the front passenger side and rear power windows operate as follows:

      OK
      Condition Regulator Switch Switch Operation Power Window

      • Power switch ON (IG)

      • Window lock switch OFF

      		 Front passenger side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
      Rear LH side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
      Rear RH side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)

  3. CHECK AUTO UP / DOWN FUNCTION


    1. Check that the driver side power window operates as follows:

      OK
      Condition Master Switch Switch Operation Power Window
      Power switch ON (IG) Driver side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)

    2. Check that the front passenger side and rear power windows operate as follows:

      OK
      Condition Regulator Switch Switch Operation Power Window

      • Power switch ON (IG)

      • Window lock switch OFF

      		 Front passenger side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear LH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear RH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)

  4. CHECK REMOTE MANUAL UP / DOWN FUNCTION


    1. Check that the front passenger side and rear power windows operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Power switch ON (IG)

      • Window lock switch OFF

      		 Front passenger side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
      Rear LH side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
      Rear RH side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)

  5. CHECK REMOTE AUTO UP / DOWN FUNCTION


    1. Check that the front passenger side and rear power windows operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Power switch ON (IG)

      • Window lock switch OFF

      		 Front passenger side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear LH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear RH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)

  6. CHECK POWER WINDOW OPERATION FUNCTION AFTER POWER SWITCH OFF


    1. Check that all the power windows can be operated with the master switch after the power switch is turned OFF.

    2. Check that the key-off operation function does not operate after a front side door is opened.

    3. Check that all the power windows cannot be operated after more than approximately 45 seconds have elapsed since the power switch is turned OFF.

  7. CHECK KEY-LINKED FUNCTION USING DRIVER SIDE DOOR KEY CYLINDER


    1. Check that all power windows operate as follows.

      OK
      Condition Door Key Cylinder Operation Power Window
      No key is inside vehicle, and all doors are closed Turned (LOCK) for more than 2.3 seconds UP (Closes)
      No key is inside vehicle, and all doors are closed Returned to neutral position. STOP
      No key is inside vehicle, and all doors are closed Turned (UNLOCK) for more than 2.3 seconds DOWN (Opens)
      No key is inside vehicle, and all doors are closed Returned to neutral position. STOP

  8. CHECK TRANSMITTER-LINKED FUNCTION


    1. Check that all power windows operate as follows when operating the transmitter.

      OK
      Condition Transmitter Operation Power Window
      No key is inside vehicle, and all doors are closed UNLOCK switch pressed for more than 3.0 seconds DOWN (Opens)
      No key is inside vehicle, and all doors are closed UNLOCK switch released. STOP
      No key is inside vehicle, and all doors are closed LOCK switch pressed for more than 3.0 seconds* UP (Closes)*
      No key is inside vehicle, and all doors are closed LOCK switch released.* STOP*

      Tech Tips

      *: Except Korea

  9. CHECK AUTO UP FUNCTION USING ENTRY LOCK SWITCH


    1. Check that all power windows operate as follows when the entry lock switch is pressed and held.

      OK
      Condition Switch Operation Power Window
      No key is inside vehicle, and all doors are closed Entry lock switch pressed for more than 3.0 seconds UP (Closes)
      No key is inside vehicle, and all doors are closed Entry lock switch released. STOP

  10. CHECK JAM PROTECTION FUNCTION


    1. Check the basic function.

      CAUTION:


      • The jam protection function is operative during both the AUTO UP and MANUAL UP operation.

      • Do not put your fingers between the door frame and door glass to check functions. Also, prevent any part of your body from being caught during inspection.

      Tech Tips

      The jam protection function is operative during both AUTO UP and MANUAL UP operation while the engine is running or the power switch is ON (IG), and also 45 seconds after the power switch is turned OFF.


      1. Fully open the window.

      2. A000ZRIE01
        *1 Cloth
        *2 Thick Book

        Set a thick book wrapped with a cloth or piece of cloth near the power window fully closed position.

      3. Operate the AUTO UP or MANUAL UP function to check that the power window goes down before the book is caught between the window and door frame, and stops when the opening reaches approximately 200 mm (7.874 in.).

        Tech Tips

        The power window moves down approximately 125 mm (4.921 in.). However, when the opening does not reach 200 mm (7.874 in.), the power window continues to go down until the opening reaches 200 mm (7.874 in.) or until approximately 5 seconds have elapsed.

      4. While the power window is moving down, check that the door glass cannot be moved up even when the power window switch is used.

  11. CHECK CATCH PROTECTION FUNCTION

    A000ZJC

    1. Check the basic operation.

      Tech Tips

      The catch protection function operates when the power switch on (IG), and when auto down and manual down are operated after the power switch is turned off.


      1. Fully close all door windows.

      2. While using auto down or manual down to open the window, grasp the upper edge of the door lass with one or two hands and check that the door glass operation stops.

        Tech Tips

        While using auto down or manual down to open the window, grasp the upper edge of the door lass with one or two hands and check that the door glass operation stops.

  12. CHECK POWER WINDOW SWITCH LED ILLUMINATION


    1. Check the LED illumination.

      A000ZHVE19

      1. Check that the LED located on the power window switch illuminates when the power switch is ON (IG).