POWER OUTLET SOCKET(for Instrument Panel Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 3 BOX PANEL

    Click here

  5. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY


    1. A000YND

      Detach the wire harness clamp.

    2. A000VXE

      Using a screwdriver, release the lock and remove the wire harness clamp from the connector.

    3. A000UV1

      Using a screwdriver, detach the claw and remove the No. 1 power outlet socket assembly.

  9. REMOVE NO. 1 POWER OUTLET SOCKET COVER


    1. A000WTC

      Detach the 2 claws and remove the No. 1 power outlet socket cover from the upper console panel sub-assembly.