CLOCK INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL CLOCK ASSEMBLY

   
   

   1. 

      Attach the 2 claws to install the clock assembly to the instrument cluster finish panel garnish assembly.

   2. Connect the connector.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

   Click here

3. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

   Click here

5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

8. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

   Click here

9. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

   Click here

10. INSTALL NO. 3 BOX PANEL

    Click here

11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

12. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

13. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

15. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

16. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

17. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

18. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here