BATTERY REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  2. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  3. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  4. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  5. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  6. REMOVE AUXILIARY BATTERY


    1. A000U4Z

      Disconnect the cable from auxiliary battery negative (-) terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    2. Disconnect the cable from auxiliary battery positive (+) terminal.

    3. Disconnect the thermistor sensor connector.

    4. Disconnect the battery room ventilation hose.

    5. Remove the nut and battery clamp.

    6. Remove the bolt and No. 2 battery hold down clamp.

    7. Remove the auxiliary battery.

  7. REMOVE BATTERY CARRIER

    A000ZLU

    1. Remove the 3 bolts and battery carrier.