OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT CENTER FLOOR COVER (w/ Cover)

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  6. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR

    Click here

  7. DRAIN ENGINE OIL

    Click here

  8. REMOVE ENGINE OIL LEVEL SENSOR


    1. A00101V

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts.

    3. A000TYH

      Rotate the engine oil level sensor 180° and remove it.

    4. A000XRNE08
      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    5. Remove the gasket from the oil level sensor.

      Tech Tips

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.