THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT


    1. A000VZR

      Install a new gasket and the water inlet sub-assembly with thermostat with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. CONNECT NO. 2 RADIATOR HOSE


    1. A000TI0E03
      Text in Illustration
      *a Front Side of Vehicle
      *b RH Side

      Connect the No. 2 radiator hose to the water inlet housing.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

  3. INSTALL RADIATOR RESERVOIR ASSEMBLY


    1. Install the radiator reservoir assembly with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
    2. A000V71E03
      Text in Illustration
      *a Upper

      Connect the 2 reservoir hoses.

      Tech Tips

      The direction of each hose clamp is indicated in the illustration.

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER


    1. Install the No. 1 engine under cover with the 13 screws and 7 clips.

  7. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  8. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  9. INSTALL NO. 1 AIR CLEANER INLET

    Click here

  10. INSTALL ENGINE ROOM SIDE COVER RH

    Click here

  11. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  12. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here