FUEL PUMP DISASSEMBLY

PROCEDURE


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A000WYME03

      Disconnect the fuel sender gauge connector from the fuel suction plate.

    2. Press down on the sender gauge claw labeled A. Then slide the sender gauge upward.

      Note

      Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

  2. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY


    1. A000XEM

      Disconnect the fuel pump connector from the fuel suction plate.

    2. A000XBME09
      *1 E-Ring

      Using needle nose pliers, remove the E-ring.

    3. Remove the fuel suction plate and spring from the sub-tank.

  3. REMOVE FUEL FILTER


    1. A000WIR

      Detach the 2 claws and remove the filter from the sub-tank.

  4. REMOVE JET PUMP


    1. A000ZH5E05
      *1 Screwdriver
      *2 Jet Pump

      Using a screwdriver with the tip taped, remove the jet pump from the sub-tank.

    2. A000WB8E24
      *1 Jet Pump
      *2 O-Ring

      Remove the O-ring from the jet pump.

  5. REMOVE FUEL PUMP ASSEMBLY


    1. A000YSD

      Disconnect the fuel pump connector from the fuel pump.

    2. A000V8GE04
      *1 O-Ring

      Detach the 5 claws on the filter and remove the fuel pump from the fuel filter.

    3. Remove the fuel main valve from the fuel filter.

    4. Remove the 2 O-rings from the fuel main valve.

    5. Remove the O-ring and spacer from the fuel filter.