INJECTOR DRIVER REMOVAL

PROCEDURE


  1. DISCONNECT ENGINE WIRE HARNESS

    Click here

  2. REMOVE INJECTOR DRIVER BRACKET


    1. A000XYVE04
      *a Claw

      Disconnect the 4 injector driver connectors as follows: (1) push the claw downward, and (2) move the lock lever to release the lock.

    2. Using a clip remover, detach the 3 wire harness clamps.

    3. A000Y1LE09
      *1 Nut
      *2 No. 2 Injector Driver
      *3 No. 1 Injector Driver

      Remove the 2 bolts, 2 nuts and injector driver bracket together with the 2 injector drivers.

      Note

      Be careful not to drop or strike the injector driver.

    4. Remove the No. 1 engine cover.

  3. REMOVE INJECTOR DRIVER


    1. Remove the 8 nuts and 2 injector drivers from the injector driver bracket.