FUEL PRESSURE REGULATOR REASSEMBLY

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. 

      *1

      O-Ring

      Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel pressure regulator.

   2. 

      *1	Cap
      *2	Fuel Pressure Regulator

      Install the fuel pressure regulator to the fuel filter.

   3. Attach the 2 claws of the fuel filter and install the cap.

      Note

      
      

      • Make sure the O-rings are not cut or pinched during the installation.

      • Attach the claws securely.

   4. 

      Connect the fuel pump connector to the fuel pump.

2. INSTALL JET PUMP

   Click here

3. INSTALL FUEL FILTER

   Click here

4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

   Click here

5. INSTALL FUEL SENDER GAUGE ASSEMBLY

   Click here