DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE INTAKE AIR CONNECTOR PIPE

    Click here

  5. REMOVE V-RIBBED BELT


    1. A000YUB

      Rotate the tensioner pulley counterclockwise to loosen the V-ribbed belt tension assembly.

      Tech Tips

      The pulley bolt for the V-ribbed belt tensioner assembly has a left-handed thread.

    2. A000ZWRE03
      *1 Hole

      While turning the V-ribbed belt tensioner assembly counterclockwise, align the holes. Insert a bar with a diameter of 5 mm (0.197 in.) into the holes to fix the V-ribbed belt tensioner assembly in place.

    3. Remove the V-ribbed belt.