FUEL INJECTOR(for Port Injection) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

PROCEDURE


  1. INSTALL FUEL INJECTOR ASSEMBLY


    1. A000TLKE03
      *1 O-Ring

      Apply gasoline to a new O-ring and install it to the injector.

      Note

      Check that there is no damage or foreign material in the groove of the injector when installing the injector's O-ring.

    2. A000UOK

      Connect the connector to the injector.

    3. A000ZQBE11
      *1 CORRECT
      *2 INCORRECT

      Install the injector to the delivery pipe as shown in the illustration.

      Note


      • Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

      • When inserting the injector, be careful not to damage the O-ring.

      • Attach the part of the injector labeled B between the parts of the delivery pipe labeled A.

  2. INSTALL FUEL DELIVERY PIPE


    1. Install the 4 delivery pipe spacers and 8 insulators to the cylinder head.

    2. Install the 2 delivery pipes (with injectors) to the cylinder head.

    3. A000YRW

      Install the 4 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Check that the part of the injector labeled B is between the parts of the delivery pipe labeled A.

      A000ZQBE11
      *1 CORRECT
      *2 INCORRECT
    4. A00100NE05
      *1 for Bank 1:
      *2 for Bank 2:

      Connect the 4 wire harness clamps.

    5. A000Z2EE06
      *1 for Bank 1:
      *2 for Bank 2:

      Connect the 2 delivery pipe connectors.

  3. CONNECT FUEL TUBE SUB-ASSEMBLY

    A000ZNHE01

    1. Push in the tube connector to the pipe until the tube connector makes a "click" sound.

    2. Push down on the retainer to lock it in place.

      Note


      • Check that there is no damage or foreign objects on the connected part of the fuel pipe.

      • After connecting, check that the fuel tube connector and the pipe are securely connected by pulling on them.

  4. CONNECT NO. 3 FUEL HOSE

    A000WGFE04

    1. Push in the tube connector to the pipe until the tube connector makes a "click" sound.

    2. Install the fuel pipe clamp.

      Note


      • Check that there is no damage or foreign objects on the connected part of the fuel pipe.

      • After connecting, check that the fuel tube connector and the pipe are securely connected by pulling on them.

  5. INSTALL INTAKE MANIFOLD

    Click here

  6. INSPECT FOR FUEL LEAK

    Click here