KNOCK SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

PROCEDURE


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY LH

    Click here

  5. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY

    Click here

  6. REMOVE SEPARATOR CASE


    1. A000ZVE

      Disconnect the fuel pressure sensor connector.

    2. A000ZTO

      Remove the 4 bolts and separator case.

  7. REMOVE KNOCK SENSOR

    A000WCCE02
    *1 Front

    1. Disconnect the 4 knock sensor connectors.

    2. Remove the 4 bolts and 4 knock sensors.