ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  5. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  6. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  7. DRAIN ENGINE COOLANT

    Click here

  8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

    A000Z5C

    1. Disconnect the engine coolant temperature sensor connector.

    2. Remove the engine coolant temperature sensor.

    3. Remove the gasket from the engine coolant temperature sensor.